WHY COME TO US

There is nothing more important to us than the privilege of maintaining your gear. As a family-owned business our philosophy is simple: Take care of everyone’s equipment as if it is your own. No compromises, just excellent service.

THE PROCESS OF SCUBA REGULATOR SERVICING

When we have received your regulator, an estimate of costing will be advised first. Upon agreement, we will proceed with the maintenance (annual or 100 dives, whichever comes first).

  1. Disassembly of regulator (all stages requested) and hoses.
  2. Each part of the regulator goes through an ultrasonic cleaning process.
  3. The regulator is then manually cleaned one more time and air dryed.
  4. All recommended maintenace parts are replaced
  5. The hidden schrader valve of your BC Hose is replaced
  6. All hoses O-Rings are replaced
  7. O-Rings on your gauges are replaced
  8. Regulator is tuned and reset back to factory recommendations
  9. Regulator goes through a water leak test
  10. Regulator is greased and returned to owner

Note : We only use MCG-111 Oxygen Grease for our servicing needs.

regulator servicing mares apeks scubapro cressi aqualung
t

Were You Aware

As much as we try to take care of our investments, there are things that are beyond our control. For instance, the place that you are diving, they might not have a regular maintenance of their air compressor. This is especially true when they are catering to the mass market of divers. Very often, when we are servicing scuba regulators, we often come across regulators that are covered in carbon, telling us that the owner has been diving with dive centres that seldom service their air compressors.

Proper Tools and Authorized Maintenance Kits

Before sending your regulator to any dive centres for servicing. You have the right to request to see their service counter or room, if they have proper valid brand specific tools and maintenance kits. Every brand of regulator is unique and most of them require some special tools to correct disassemble and reassembly after each servicing. Original Authorized Maintenance (Service) kits ensure that the regulator do not have wrong parts in them.

Proper calibration and testing instruments is also a necessity to ensure that your regulator is performing up to the default factory settings.

Any scuba gear repair, servicing or change of battery will have a warranty period of three months. Any claims made during the warranty period, we will not charge a single cent should any problem arise. Also, if you do change your dive computer batteries elsewhere, be sure to check your last dive. The watertight chamber test would have cause the computer to logged a dive

Regulator Servicing 1st 2nd Stage Only

Apeks | Aqualung | Mares | Scubapro | Cressi | Atomic Aquatics
$195/Unit
  • Inclusive of Authorized Service Parts and Fees
  • Time Needed : 3 days
  • Add 50% for Overnight Servicing
  • Add 50% for Titanium Regulators
  • Add $25.00 for Octopus (Excluding Parts)
  • Add $10.00 for Gauge (Including Parts)

Regulator Servicing 1st 2nd Stage Only

Poseidon All Models
$290/Unit
  • Inclusive of Authorized Service Parts and Fees
  • Time Needed : 3 days
  • Add 50% for Overnight Servicing
  • Add $25.00 for Octopus (Excluding Parts)
  • Add $10.00 for Gauge (Including Parts)

Air Source

Scubapro Air 2 | Atomic SS1 | Dive Rite | Mares Air Control | Aqualung Air Source
$80/75
  • Inclusive of Authorized Service Parts and Fees
  • Time Needed : 3 days
  • Add 50% for Overnight Servicing

Oxygen Cleaning

Scubapro | Apeks | Halycon
$245/Unit
  • Inclusive of Authorized O2 Service Parts and Fees
  • Time Needed : 3 days
  • Add 50% for Overnight Servicing
  • Add $25.00 for Octopus (Excluding Parts)
  • Add $10.00 for Gauge (Including Parts)

LP Hose Servicing

Power Inflator Hose
$15/Unit
  • Inclusive of  Service Parts and Fees
  • Time Needed : 30 minutes