Sidemount Diving

Singapore’s top Scuba Sidemount Diving accessories and BCD from top brands of Apeks, XDeep and Scubapro


Showing all 16 results

  • 6mm 1/4 Inch Shockcord Bungee Cord Sidemount BCD

    $ 1.80

    1/4″ shock cord is manufactured for its elastic qualities and integral strength resistance while elongated. The elasticity helps absorb shock which assists in transporting items, holding items together, storing items, securing items, and much more.

    Bungee Cord are sold per metre.

  • 90 Degree Swivel Adapter, LP 2nd Stage: 9/16-Inch M x 9/16-Inch F

    $ 40.00

    The 90 Degree Angled Adapter attaches between the regulator second stage and its low pressure hose routing the hose down the diver’s chest and/or under the arm, which increases comfort and streamlining.

  • Anti-Slip Elastic Hose Retainer Large

    Our Anti-Slip Elastic Hose Retainer Large is an excellent accessory to keep your bailout, stage bottle or deco bottle hoses tuck away when not in use. Our Elastic Hose Retainer is made by 2″ wide anti-slip elastic band and the large size is fit for 80 cu ft cylinders which is 7.25inch diameter. Also, these hose retainers have a sewn webbing loop for easy grip, even with gloves.

  • Apeks XTX 50 Sidemount Single

    $ 1,088.00
  • Band Kit for Sidemount Tank Rigging

    $ 60.00

    Sidemount tank cam band rig kit with stainless steel hardware.

    Complete rigging kit needed to setup your scuba cylinder as a dedicated Side-Mount tank.


    • Ultra durable and lightweight Polyacetal cam band and tank strap
    • Stainless steel bolt snap and glider
    • Nylon line
    • No metal to metal connection
    • Rig kit will fit aluminum and steel tanks
  • Double D Crotch Strap

    $ 40.00

    Double D crotch strap replaces the standard D-Ring / Triglide at the back of your crotch strap. New designed has bungee retention slots added which can be used to hold down the standard SM wings

  • HP Rubber Hose 15cm / 6 inches

    All these high pressure rubber SCUBA hoses have chromed brass fittings and are designed to conform to the EN 250:2014 standard with a maximum working pressure of {5000 psi | 350 bar} and a burst pressure rating of {20000 PSI | 1400 BAR}. All these HP hoses are Nitrox Ready.

  • LP Rubber Hose 210cm / 7ft

    $ 80.00

    Made in USA rubber low pressure regulator hoses are made specifically for scuba diving with chromed brass fittings.

    • Traditional rubber with chromed brass fittings
    • Length is measured from end to end of hose
    • 3/8-inch male to 1st stage – 9/16-inch female to 2nd
    • All hoses are Nitrox Ready
  • LP Rubber Hose 22″ to 40″

    All these hoses are Nitrox Ready and Made in USA

    The typical low pressure regulator hose is a 3/8-inch male at the end that screws into the first stage LP port, and at the other end you’ll find a 9/16-inch female that screws onto the second stage regulator body. Our most popular regulator hose lengths are approximately {22 in | 56 cm} for backup regulators, {26 in | 66 cm} long for sport regulators, {40 in | 102 cm} for octo/stage/deco regulators, and {7 ft | 2.1 m} for technical regulators.

  • Scubapro X-Tek Sidemount BCD

    Scubapro X-Tek Sidemount BCD

    Designed for small spaces, sidemount diving has actually become widespread as a popular approach to underwater exploring.

    Developed in coordination with leading sidemount cave divers, SCUBAPRO's X-TEK SIDEMOUNT SYSTEM, with its modular design, quality components and independent air cell, allows you to build a fully customized rig to handle any recreational or technical sidemount dive plan.

  • Sidemount BC Inflator Rubber Hoses

    Our rubber low pressure BC inflator hoses are made specifically for scuba diving with chromed brass fittings.

  • Sidemount Bungee Hook Triglides

    $ 80.00
    • Fixture point for the sidemount bladder Serrated tri-glides with built in bungee hooks. Comes in kit with 3. One on each hip and one to the crutch band.
    • Made of 316 Stainless Steel
    • Sold in a pack of 3
  • Sidemount Harness Adjustable D-Ring

    Sliding D-Rings for sidemount

    • set of two sliding d-rings with its retainers
  • xDeep Expandable Cargo SideMount Pocket

    $ 120.00

    Side mount dedicated pocket for accessories. A MUST HAVE FOR ALL SIDEMOUNT DIVERS. It’s made from high-quality, durable material. Equiped with not one, but two steel D-ring as a additional mount points, and two partitions enclosed with a zipper. Two double-ended carabiners and bungee strap included providing convenient attachment to your harness. By sliding the zipper it is possible to further extend the space provided by the cargo bag if you ever need to pack up something bigger.

  • XDeep Sidemount Buttplate

    $ 90.00

    xDeep butt plate serves two purposes. It supports steel tanks in sidemount especially the short ones but is also easy to reach and convenient storage space for gear like reel, spools, camera and other dive gear that you use on a dive. Large rails size makes them easy and quick to find.

  • Sale! xdeep stealth 2.0 tec

    xDeep Stealth 2.0 TEC Sidemount System

    $ 980.00 $ 920.00

    The Xdeep Stealth 2.0 TEC Sidemount Setup is a versatile sidemount system which will support a combination of open water or cave configurations from double cylinders to multiple tanks including stages. With a double shell 19Kg (42Lbs) lift bladder based around the popular Xdeep classic harness, the Stealth 2.0 TEC can be used for open water sidemount diving, deep decompression multiple cylinder diving and extended cave penetrations.